istabreeze.store Experience since 2011 Heli 4Kw On-Grid Windgenerator iSTA-BREEZE d now your wind generator from ISTA BREEZE Company DescriptionWe are pleased to introduce our new wind generator IstaBreeze® helicopter series.​The newly developed IstaBreeze® Heli 4.0 is a wind generator for long-term professional use, which delivers reliable energy even under extreme conditions automatically and you need grid inverter. The generous dimensioning of the generator components and the heat dissipation through the grooves in the nacelle housing ensure a low thermal load, which ensures a long service life even at high ambient temperatures.The generator shaft runs in permanently lubricated, robust deep groove ball bearings made of stainless steel. The carrying element of the heli series is equipped with azimuth pivot bearings. PRODUCT FEATURES - WIND TURBINE Automatic Storm Securing: 13 m/s (by tilting the rotor) Casing: GRP hand laminated. Complete Weight of the System: Approximately 100 kgCut-in: 2,9 m/s Direction: Any Efficiency: 92% Generator: 3-phase permanent magnet (High efficiency due to strong permanent magnets (NdFeB magnets, 150 ° temperature resistant) Weight 31 kg. Manual Storm Securing: (Optional) Switch (Short Brake) Max Performance: 7,4 kW Power Transmission: Slip ring, thus no twisting of the cable possible. (pre-assembled in the supporting element)Speed Range: 0 rpm-600 rpm Type: Power SupplyWear Element: Powder-coated steel Work Space: 120 – 440 rpm (LOW RPM WIND TURBINE) Rated Power: 3,8 kW Nominal Voltage: 350 VDC  BLADE SPECIFICATION  Weight: 2900g (Per Blade) Material: GRP (hand laminated) Made in Germany!Noise:40 dB Rotor Diameter: 300 cm Color: White upremeauctiononlinesoftware.responsive.2016supremeauctiononlinesoftware.redesigner

istabreeze.store Experience since 2011 Set i-1500W 24V Windsafe Windgenerator + Hybrid Charge Controller iSTA-BREEZE benefit from our excellent customer service and years of experience in wind technologies Product description - Wind Turbine:Original wind generator iSTA Breeze i-1500 WindsafeWe are pleased to introduce our new wind generator IstaBreeze® WindSafe.The newly developed IstaBreeze® WindSafe is a wind generator for long-term professional use, which delivers energy automatically and unattended reliably even under extreme conditions.Our WindSafe IstaBreeze® wind turbine model has a revolutionary turbine protection system, the rotor is supported on a movable platform that raises the entire structure by 90 degrees in windstorm or strong wind, modifying the repeller relative to the wind, reducing frontal attack and rotation is reduced. This protects the turbine from strong winds. This robust construction ensures a long service life of our turbines and becomes a unique system in the category of mini wind generators.The generous dimensioning of the generator components and the heat dissipation through the grooves in the aluminum housing of the generator ensure a low thermal load, which ensures a long service life even at high ambient temperatures.ARTICLE FEATURES -GENERATORAlternator Housing Aluminium DIRECTION FLAG Plastic + 30% glass fiberGENERATOR 3-phase permanent magnet (High efficiency due to strong permanent magnets (NdFeBo magnets, 150 ° temperature resistant) (The threading of our copper winding is done exclusively by hand.)POWER THICKNESS max. 55ARATED CAPACITY 1500wMAX RATED 2000WSYSTEM VOLTAGE 24 VSUPPORTING ELEMENT Automatic Road Circuit 14 m / s (by tilting the rotor) Material Aluminum castingPOWER TRANSMISSION Slip ring, thus no twisting of the cable possible. (pre-assembled in the supporting element) WEIGHT incl. GENERATOR 23 kgBLADE SPECIFICATIONDIAMETER 220 cmMATERIAL CarbonLENGHT 107 cmNOISE 40 dbROTOR BLADES WEIGHT (Per Blade) 780 grCarbon is light, silent and start turn fast CHARGE CONTROLLER Big LCD display.The images tell working state visually.Various data show: real-time wind turbine voltage,current,power;solar panel voltage,current, power;battery group voltage, charge current.(The main board is with button battery,in case of power failure, history data can be saved for 30 days)Two sets of control systems：PWM constant voltage system and three-phase dump load system.PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM´s capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system. When the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current.When the battery disconnect or damage, the three-phase dump load will start automatically to avoid the wind turbine idling and runaway accident.The protection function of battery: polarity reverse protection, disconnection and damage protection.Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery. CHARGE CONTROLLER TECHNICAL DETAILSWind Turbine Rated Power: 1,5KWSolar Panel Power: 300Wp* Battery: 24vdcPWM Constrant Pressure Voltage: > 29vdc3-Phase Load Voltage of the Wind Turbine: 30±1VdcSolar Controller Stop Charging Voltage: 29 ±1Vdc Low Voltage of the Battery: 20±1VdcPWM Fuse: 63A* Solar Fuse: 16ACharging Fuse: 63ANoise (1m): <40dB* Degree of Protection: IP20 (Indoor)* Cooling Method: Forced Air Cooling MAST CONNECTION FLANGE IS NOT INCLUDE eauctiononlinesoftware.responsive.2016supremeauctiononlinesoftware.redesigner

istabreeze.store Experience since 2011 Set i-2000W 48V Windsafe Windgenerator + Hybrid Charge Controller iSTA-BREEZE Find now your wind generator from ISTA BREEZE CompanyMAST CONNECTION FLANGE IS NOT INCLUDEWe are pleased to introduce our new wind generator IstaBreeze® WindSafe.The newly developed IstaBreeze® WindSafe is a wind generator for long-term professional use, which delivers energy automatically and unattended reliably even under extreme conditions.Our WindSafe's aBreeze® wind turbine model has a revolutionary turbine protection system, the rotor is supported on a movable platform that raises the entire structure by 90 degrees during windstorm or strong wind, thereby modifying the repeller in relation to the wind, reducing frontal attack and rotation is reduced. This protects the turbine from hurricanes or strong winds. This robust construction ensures a long lifetime of our turbines and becomes a unique system in the category of mini wind generators.The generous dimensioning of the generator components and the heat dissipation through the grooves in the aluminum housing of the generator ensure a low thermal load, which ensures a long service life even at high ambient temperatures. WIND TURBINE FEATURES Alternator Housing Aluminium DIRECTION FLAG Plastic + 30% glass fiber GENERATOR 3-phase permanent magnet (High efficiency due to strong permanent magnets (NdFeB magnets, 150 ° temperature resistant) (The threading of our copper winding is done exclusively by hand.) POWER THICKNESS max. 40A RATED CAPACITY 2000w SYSTEM VOLTAGE 48 V SUPPORTING ELEMENT Automatic Road Circuit 14 m / s (by tilting the rotor) Material cast aluminum POWER TRANSMISSION Slip ring, thus no twisting of the cable possible. (pre-assembled in the supporting element) WEIGHT incl. GENERATOR 25 kg  BLADE SPECIFICATIONDIAMETER 220 cm WEIGHT per SHEET 780g MATERIAL: Carbon LENGHT 107 cm NOISE 40 dbCarbon is light, silent and start turn fastHYBRID CHARGE CONTROLLER ◆Big LCD display.The images tell working state visually.Various data show: real-time wind turbine voltage,current,power;solar panel voltage,current, power;battery group voltage, charge current.(The main board is with button battery,in case of power failure, history data can be saved for 30 days)  ◆Two sets of control systems：PWM constant voltage system and three-phase dump load system.  ◆PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM´s capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.  ◆When the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current. ◆When the battery disconnect or damage, the three-phase dump load will start automatically to avoid the wind turbine idling and runaway accident. ◆The protection function of battery: polarity reverse protection, disconnection and damage protection.  ◆Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.     HYBRID CHARGE CONTROLLER- TECHNICAL DETAILS *  Wind Turbine Rated Power: 2KW* Solar Panel Power: 600 Wp* Battery: 48VDC * Pwm Constant Pressure Voltage: >58vdc* 3-phase load voltage of the wind turbine: 60±1Vdc * Solar Controller Stop Charging Voltage: 58±1Vdc * Low Voltage of the Battery: 40±1Vdc * PWM Fuse: 50A* Solar Fuse: 20A* Charging Fuse: 63A* Noise (1m): <40dB* Degree of Protection: IP20 (Indoor)* Cooling Method: Forced Air Cooling  supremeauctiononlinesoftware.responsive.2016supremeauctiononlinesoftware.redesigner

istabreeze.store Experience since 2011 KIT i-700W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE Find now your wind generator from ISTA BREEZE CompanyDescriptionRobust wind generator original IstaBreeze® i-700 / 12V in set.Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable, at the same time unusually light. The housing is made of aluminum, which guarantees optimal cooling of the generator.The maintenance-free sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast.Installation in mast tube by plug connection. Required mast tube nominal diameter: 37mm nominal size! The Wind / Solar hybrid charge controller from IstaBreeze® is an intelligent controller of the wind turbine and the solar cells that controls you at the same time. The high-end device thus controls your island system. It is used to safely and efficiently charge and control your battery with the Wind Generator / Solar Module combination.With its discreet appearance, simple operation, with integrated protection functions, this device has high efficiency and low no-load losses. This version of the controller will significantly increase the life and stability of the whole system, especially the batteries.The special features and product information are listed below:Use of solid state components. Increasing the life of the controller.Microprocessor controlled charge with integrated voltage and current limiting.Electromagnetic brake control, the generator is automatically braked gently when the battery is full, modern braking system in three steps to avoid immediate blockage of the turbine. Increasing the life of the stator.Protection against overcharging, deep discharge, short circuit, overload and against incorrect reverse polarity.PRODUCT FEATURES - WIND TURBINEBODY SUPPORT ELEMENT Die-cast aluminum (powder-coated)GENERATOR Aluminum profile (powder coated)VOLTAGE 12 V (AC)RATED POWER 700WMAX 800WCURRENT maximum 60ABLADE SPECIFICATIONMATERIAL Plastic + 30% glass fibersLENGHT 90 cmNOISE 40 dbWEIGHT 620 g (per sheet)ROTOR DIAMETER 186 cmcolor White Charge Controller SPECIFICATION  Nominal battery voltage 12 oder 24v  24V 24V         48v Power wind turbine 800W 1000W 1500W      2000w Power Pv modules maximum 300W 600W 600W     600w  charging voltage 12,6V 25,2V 25,2V      50,5V Charging current wind max.   45A  45A       33A Battery undervoltage shutdown 8,5 V 17,5V 17,5V        45V Voltage for battery charging end and at the beginning of the magnetic brake 14,8V 28,4V 28,4V     58,4V protection voltage 16V 30V 30V        64V Dimensions in mm 300x200x150 300x200x150 300x200x150 300x200x150 Weight in kg 3  3 3 3 Recommended battery 12V / 24V 100 A 100 A        100 A Maximum input voltage 25V /  45V 45V 45V  60V   upremeauctiononlinesoftware.responsive.2016supremeauctiononlinesoftware.redesigner

istabreeze.store Experience since 2011 Set i-500W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE Set i-500W 12V Windgenerator + Hybrid Charge Controller iSTA-BREEZE Find now your wind generator from ISTA BREEZE Company Product description:As a result of our ongoing improvement process, we are pleased to present our new wind generator i-500 plus.The newly developed IstaBreeze® i-500 plus is a wind generator for professional use.The generous dimensioning of the generator components and the heat dissipation via the newly developed aluminum housing ensure a low thermal load which ensures a long service life even at high ambient temperatures.The generator shaft runs in two encapsulated and permanent lubricated ball bearing bearings made of stainless steel. At the front bearing, a special friction-free sealing disc prevents the penetration of moisture and dust.Installation in mast tube by plug connection. Required mast tube diameter: 37 mm Required dimension! PRODUCT FEATURES - WIND TURBINEMODEL 400WVOLTAGE 12 V (AC)MAX. POWER 450WAlternator Housing ALUMINIUM BODY Plastic + 30% glass fiberCURRENT 30 ABLADE SPECIFICATIONMATERIAL Plastic + 30% glass fibersLENGHT 50 cmNOISE 40 dbWEIGHT 220 g (per sheet)ROTOR DIAMETER 103 cmcolor black

istabreeze.store Experience since 2011 Set i-500W 24V Windgenerator + Hybrid Charge Controller iSTA-BREEZE Find now your wind generator from ISTA BREEZE Company DescriptionProduct description:As a result of our ongoing improvement process, we are pleased to present our new wind generator i-500 plus.The newly developed IstaBreeze® i-500 plus is a wind generator for professional use.The generous dimensioning of the generator components and the heat dissipation via the newly developed aluminum housing ensure a low thermal load which ensures a long service life even at high ambient temperatures.The generator shaft runs in two encapsulated and permanent lubricated ball bearing bearings made of stainless steel. At the front bearing, a special friction-free sealing disc prevents the penetration of moisture and dust.Installation in the mast tube by plug connection. Required mast tube diameter: 37 mm Required dimension!The 3-phase alternating current (AC) of the generator can be used to charge 12 V batteries (DC) and accumulators with the associated charger.Aluminum housing with LEDs for indication: charging, battery connected and battery full! PRODUCT FEATURES - WIND TURBINEVOLTAGE 24 V (AC)DECIBEL 40 dbRATED POWER 400W MAX. POWER 450WAlternator Housing ALUMINUM BODY Plastic + 30% glass fiberCURRENT max 18ABLADE SPECIFICATION MATERIAL Plastic + 30% glass fibersLENGHT 50 cmWEIGHT 220g (per sheet)ROTOR DIAMETER 103 cmcolor black ControllerStandard Batteryvoltage minimum 9,0Vbrake function From 28,2VCharge current max. 20 ACharging voltage max. 25,2Vdeep discharge noDimensions LxWxH 150x150x60mm 0,5 kgMaximum input power PV module 150WMaximum input power Wind turbine 500WNominal battery voltage 24 VDCProtection against wrong polarity reversal (+/-) noRecommended battery min. 100Ahnonlinesoftware.responsive.2016supremeauctiononlinesoftware.redesigner

istabreeze.store Experience since 2011 i-700W 12V/24V/48V Windgenerator iSTA-BREEZE Find now your wind generator from ISTA BREEZE CompanyDescriptionRobust Wind Generator Original IstaBreeze® i-700 / 12V - 24V - 48VDue to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable, at the same time unusually light. The housing is made of aluminum, which guarantees optimal cooling of the generator.The maintenance-free sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast.Installation in mast tube by plug connection. Required mast tube nominal diameter: 37mm nominal size!Further technical data further down in the description.Matching charge controllers and masts can be found in our shop! PRODUCT FEATURES - WIND TURBINE - 12V or 24V or 48VBODY SUPPORT ELEMENT: Die-cast aluminum (powder-coated)GENERATOR: Aluminum profile (powder coated)VOLTAGE: 12 V (AC) or  VOLTAGE 24 V (AC) VOLTAGE 48 V (AC)Rated Capacity: 700W - Max 800WCURRENT: ( max 60A - 12V System ) -   ( 30A - 24V System )  - ( 15A - 48V System )BLADE SPECIFICATIONMATERIAL: Plastic + 30% glass fibersLENGHT: 90 cmNOISE: 40 dbWEIGHT: 620g (per blade)ROTOR DIAMETER: 186 cmCOLOR: White           tware.redesigner

istabreeze.store Experience since 2011 Set Heli 2Kw 48V Off-Grid Windgenerator + Hybrid Charge Controller Find now your wind generator from ISTA BREEZE CompanyDescriptionWe are pleased to introduce our new wind generator IstaBreeze® helicopter series.The newly developed IstaBreeze® Heli 2.0 is a wind generator for long-term professional use, which delivers reliable energy even under extreme conditions automaticallyThe generous dimensioning of the generator components and the heat dissipation through the grooves in the nacelle housing ensure a low thermal load, which ensures a long service life even at high ambient temperatures.The generator shaft runs in permanently lubricated, robust deep groove ball bearings made of stainless steel. The carrying element of the heli series is equipped with azimuth pivot bearings. PRODUCT FEATURES - WIND TURBINEAUTOMATIC STORM SECURING 13 m / s (by tilting the rotor)CASING hand laminated and painted.Cut-in 2,9 m/s DIRECTION Any EFFICIENCY 92%GENERATOR 3-phase permanent magnet (High efficiency due to strong permanent magnets (NdFeBo magnets, 150 ° temperature resistant)Weight 22 kg(The threading of the copper winding is done exclusively by hand.)MANUAL STORM SECURING SWITCH (SHORT BRAKE) POWER TRANSMISSION Slip ring, thus no twisting of the cable possible. (pre-assembled in the supporting element) SPEED RANGE 0 rpm- 800 rpm TYPEbattery chargers Voltage 48 VACWEAR ELEMENT Powder-coated steel WORKSPACE 150 – 600 rpm (LOW RPM WINDTURBINE)RATED POWER 2,0 KWBLADE SPECIFICATION5 PiecesMATERIAL Carbon Fiber (extremely stiff and quiet) Made in Germany!NOISE 40 dbWEIGHT 600 g (per sheet)ROTOR DIAMETER 225 cm color Black (optional white lacquered on extra charge) CHARGE CONTROLLER ◆Big LCD display.The images tell working state visually.Various data show: real-time wind turbine voltage,current,power;solar panel voltage,current, power;battery group voltage, charge current.(The main board is with button battery,in case of power failure, history data can be saved for 30 days)  ◆Two sets of control systems：PWM constant voltage system and three-phase dump load system.  ◆PWM constant voltage control is 120% of the rated power of the wind turbine. In case exceeding of PWM´s capacity, the three-phase dump load will automatically start immediately to ensure safe running of the overall wind turbine system.  ◆When the strong or super-strong wind conditions PWM control to ensure battery charged by the wind turbine with constant voltage and current. ◆When the battery disconnect or damage, the three-phase dump load will start automatically to avoid the wind turbine idling and runaway accident. ◆The protection function of battery: polarity reverse protection, disconnection and damage protection.  ◆Over-charging protection of the battery: When the battery is full (the battery voltage getting 125% of the rated voltage), the controller will carry out three-phase dump load automatically to stop charging the battery.     HYBRID CHARGE CONTROLLER- TECHNICAL DETAILS *  Wind Turbine Rated Power: 2KW* Solar Panel Power: 600 Wp* Battery: 48VDC * Pwm Constant Pressure Voltage: >58vdc* 3-phase load voltage of the wind turbine: 60±1Vdc * Solar Controller Stop Charging Voltage: 58±1Vdc  * Low Voltage of the Battery: 40±1Vdc  * PWM Fuse: 50A * Solar Fuse: 20A* Charging Fuse: 63A* Noise (1m): <40dB* Degree of Protection: IP20 (Indoor)* Cooling Method: Forced Air Cooling supremeauctiononlinesoftware.responsive.2016supremeauctiononlinesoftware.redesigner

istabreeze.store Experience since 2011 Set i700W 48V Windgenerator + 850W 48V Hybrid Charge Controller iSTA-BREEZE Find now your wind generator from ISTA BREEZE CompanyDescriptionProduct description: Wind Generator Original IstaBreeze® i-700 / 48V Now you get a set with hybrid charge controller Due to the production of glass fiber reinforced plastic, the rotor blades are very durable and stable, at the same time unusually light. The housing is made of aluminum, which guarantees optimal cooling of the generator. The maintenance-free sliding contact (without coal) guarantees a good flow of current and thus no twisting of the cable in the mast. Installation in mast tube by plug connection. Required mast tube nominal diameter: 37mm nominal size!  PRODUCT FEATURES - WIND TURBINEBODY SUPPORT ELEMENT Die-cast aluminum (powder-coated)GENERATOR Aluminum profile (powder coated)VOLTAGE 48 V (AC)RATED POWER 700WCURRENT max 15ABLADE SPECIFICATIONMATERIAL Plastic + 30% glass fibersLENGHT 90 cmNOISE 40 dbWEIGHT 620 g (per sheet)ROTOR DIAMETER 186 cmcolor: WhitePRODUCT FEATURES - Controller Hybrid Nominal output power: 850WBattery: 48VMax. Input wind energy 700WMax. Solar PV input: 150WOverload protection: 59VThe wind turbine is Max. Input current: 17AProtection Function: Over-charging the automatic brake during the stormSize: 140 x 120 x60 cmWeight: 0.6 Kgupremeauctiononlinesoftware.responsive.2016supremeauctiononlinesoftware.redesigner

schneller Versand kompetente Beratung zuverlssiger Service Top Angebote
Premium Auction Tools - Cross-Selling loading...

2022-05-01 10:47 - 124176889834

ArtikelbeschreibungBeschreibungRobuster Windgenerator Original iSTA-Breeze i-2000Aufgrund der Herstellung von glasfaserverstrktem Kunststoff sind die Rotorbltter sehr langlebig und stabil, gleichzeitig ungewhnlich leicht.Das Gehuse ist mit Khlrippen ausgestattet und besteht aus hochfestem Aluminium.Der wartungsfreie Gleitkontakt (ohne Kohle) garantiert einen guten Stromfluss und damit kein Verdrehen des Kabels im Mast.Einbau in Mastrohr durch Steckverbindung. Erforderlicher Innendurchmesser des Mastrohrs: Nenngre 37 mm!Weitere technische Daten weiter unten in der Beschreibung.Dieses Produkt wird weltweit 1000 Mal erfolgreich eingesetzt! 2 Jahre Herstellergarantie! Produktbeschreibung - Laderegler:  Groes LCD-Display. Die Bilder zeigen visuell den Betriebszustand. Verschiedene Daten zeigen: Windkraftanlagen-Spannung, Strom, Leistung, Solarpanel-Spannung, Strom, Leistung, Batteriegruppenspannung, Ladestrom (Die Hauptplatine ist mit Knopfbatterie ausgestattet) Bei Stromausfall knnen die Verlaufsdaten 30 Tage lang gespeichert werden. Zwei Stze von Steuerungssystemen: PWM-Konstantspannungssystem und Dreiphasen-Dump-Load-System. Die PWM-Konstantspannungsregelung betrgt 120% der Nennleistung der Windkraftanlage. Bei berschreitung der PWM-Kapazitt startet die dreiphasige Kipplast automatisch sofort, um einen sicheren Betrieb der gesamten Windkraftanlage zu gewhrleisten. Wenn der starke oder superstarke Wind PWM steuert, um sicherzustellen, dass die Batterie von der Windkraftanlage mit konstanter Spannung und konstantem Strom geladen wird. Wenn die Batterie abgeklemmt oder beschdigt wird, startet die dreiphasige Kipplast automatisch, um den Leerlauf der Windkraftanlage und einen auer Kontrolle geratenen Unfall zu vermeiden. Die Schutzfunktion der Batterie: Verpolungsschutz, Abschaltung und Schadensschutz. berladeschutz der Batterie: Wenn die Batterie voll ist (die Batteriespannung erreicht 125% der Nennspannung), fhrt die Steuerung automatisch eine dreiphasige Entleerungslast durch, um das Laden der Batterie zu beenden. PRODUKTMERKMALE - WINDGENERATORMaximale Leistung 2200WSpannung 48 V (AC)KRPERMATERIAL ALUMINIUMDECIBEL40 dBNennleistung 2000WGRSSE 21 x 61 x 41GEWICHT 24 kgAKTUELL 40AMAST NICHT INBEGRIFFENWINDGESCHWINDIGKEIT STARTEN WINDGESCHWINDIGKEIT 2 m / s BEWERTETE WINDGESCHWINDIGKEIT 12,5 m / s REPELLER-SPEZIFIKATIONMATERIAL Composite (wei), Karbon (Karbon)LNGE 107cmGEWICHT 650 g (wei pro Repeller) 780 g (Karbon pro Repeller)ROTORDURCHMESSER 220 cmFarbe: Karbon oder Wei HYBRID LADEREGLERNennleistung der Windkraftanlage: 2KWSolarpanel Strom: 600WpBatterie: 48VDCPWM konstante Druckspannung: >58VdcInhalt anzeigen: Windturbinenspannung, Windturbinenstrom, Windturbinenleistung, Solarpanelspannung, Solarpanelstrom, Solarpanelstrom, Batteriespannung, Ladestrom3-phasige Lastspannung der Windkraftanlage: 601VdcSolarregler stoppt Ladespannung: 581VdcNiederspannung der Batterie: 01VdcPWM-Sicherung: 50ASolar Sicherung: 20ALadesicherung: 63ALrm (1 m): 40dBStrke des Schutzes: IP20 InnenKhlungsmethode: ZwangsluftkhlungMAST / TOWER SETBeschreibungOhne Schwingungsdmpfer: Der Durchmesser des Mastes betrgt 60 mm. Der Mast kann um maximal 2 Meter verlngert werden! Innenloch, Anschlusswindgenerator ist 37 mm4 Meter IstaBreeze TOWER fr Windgenerator i700 bis i2000, IstaBreeze Es war noch nie so einfach, einen Windgenerator zu installieren. Mit dem IstaBreeze Tower ist es mglich, in wenigen Minuten einen Windgenerator zu bauen. Das Faltsystem vereinfacht den gesamten Vorgang. Whrend der Wartung werden nur wenige Schrauben gelst und der Turm kann zur Wartung zusammengeklappt werden. Dbel und Schrauben fr den Boden (Betonboden) werden noch bentigt !! Optional Der Schwingungsdmpfer fr die Windgeneratoren i-500-L-500 und i-700 bis i-2000 reduziert die bertragung von strukturellem Lrm vom Windgenerator in den Mast und damit mglicherweise ins Haus. Die Nachrstung ist sehr einfach, da der Schalldmpfer die gleichen Abmessungen wie der Windgenerator hat. Er darf nur zwischen diesen eingesetzt und mit passenden Schrauben am Mast und am Windgenerator festgeschraubt werden.Mit Schwingungsdmpfer: Der Durchmesser des Mastes betrgt 60 mm. Der Mast kann um maximal 2 Meter verlngert werden! Innenloch, Anschlusswindgenerator ist 37 mm Der Schwingungsdmpfer ist mit unseren originalen IstaBreeze-Masten 15 kg und 40 kg kompatibel. Die Gesamthhe des Schwingungsdmpfers betrgt 20 cm, der Gesamtdurchmesser des Dmpfers betrgt 13,5 cm Das Gewicht des Dmpfers betrgt 3,7 kg4 Meter IstaBreeze TOWER fr Windgenerator i700 bis i2000, IstaBreeze Es war noch nie so einfach, einen Windgenerator zu installieren. Mit dem IstaBreeze Tower ist es mglich, in wenigen Minuten einen Windgenerator zu bauen. Das Faltsystem vereinfacht den gesamten Vorgang. Whrend der Wartung werden nur wenige Schrauben gelst und der Turm kann zur Wartung zusammengeklappt werden. Dbel und Schrauben fr den Boden (Betonboden) werden noch bentigt !! Optional Der Schwingungsdmpfer fr die Windgeneratoren i-500-L-500 und i-700 bis i-2000 reduziert die bertragung von strukturellem Lrm vom Windgenerator in den Mast und damit mglicherweise ins Haus. Die Nachrstung ist sehr einfach, da der Schalldmpfer die gleichen Abmessungen wie der Windgenerator hat. Er darf nur zwischen diesen eingesetzt und mit passenden Schrauben am Mast und am Windgenerator festgeschraubt werden. Merkmale des Schwingungsdmpfers: Generatorhalterung / Innenma: 37 mm Polhalterung / Auenma: 37 mm Schrauben: in Gummi (Edelstahl V2A) gelagertMobile Description:Beschreibung Robuster Windgenerator Original iSTA-Breeze i-2000 Aufgrund der Herstellung von glasfaserverstrktem Kunststoff sind die Rotorbltter sehr langlebig und stabil, gleichzeitig ungewhnlich leicht. Das Gehuse ist mit Khlrippen ausgestattet und besteht aus hochfestem Aluminium. Der wartungsfreie Gleitkontakt (ohne Kohle) garantiert einen guten Stromfluss und damit kein Verdrehen des Kabels im Mast. Einbau in Mastrohr durch Steckverbindung. Erforderlicher Innendurchmesser des Mastrohrs: Nenngre 37 mm! Weitere technische Daten weiter unten in der Beschreibung. Dieses Produkt wird weltweit 1000 Mal erfolgreich eingesetzt! 2 Jahre Herstellergarantie!   Produktbeschreibung - Laderegler:   Groes LCD-Display. Die Bilder zeigen visuell den Betriebszustand. Verschiedene Daten zeigen: Windkraftanlagen-Spannung, Strom, Leistung, Solarpanel-Spannung, Strom, Leistung, Batteriegruppenspannung, Ladestrom (Die Hauptplatine ist mit Knopfbatterie ausgestattet) Bei Stromausfall knnen die Verlaufsdaten 30 Tage lang gespeichert werden. Zwei Stze von Steuerungssystemen: PWM-Konstantspannungssystem und Dreiphasen-Dump-L Copyright 2021 osen24.store

Premium Auction Tools - Cross-Selling loading...

2022-05-01 10:47 - 124176889834